| Beauty and Performance by Design |
| Clean Air Products has been designing and manufacturing high quality cleanroom systems, components, equipment and supplies for a broad range of applications since 1969, including those in the semiconductor, biomedical, pharmaceutical and aerospace/military industries, among others. Our comprehensive line of cleanroom products include: |
Series 701
These air showers are designed to clean off people or equipment prior to
entering an adjacent space. Air is blown out through nozzles located on the side walls at
approximately 90 MPH. The air blows into the interior space, where it cleans people or
equipment. It is then recirculated through prefilters, an internal high pressure blower, and
a HEPA filter, where it travels back to the nozzles on the internal sides of the unit. The
Series 701 air showers are available in a variety of sizes and shapes to meet individual
requirements.
|
|
Series 18
This pass thru unit can be constructed with stainless steel or white
polypropylene solid-sheet plastic. It is available in wall-mount or floor-mount for carts.
Options include, mechanical or electrical interlock, fire-rated doors, HEPA filter purge, and
safety glass viewing windows. Standard and custom sizes are available.
|
|
Series 550
The Series 550 vertical flow modular cleanroom has a modular plenum
system with full HEPA filter coverage design for true laminar flow Class 100 or Class 10
cleanrooms. The plenum sections can be furnished with the blower located on the top or
end of the unit. Options include support legs, curtains, and teardrop or flush-mount lights.
Multiple units can be assembled together to form a larger room. The vertical flow plenum
module provides close to 100% ceiling filter coverage. It is designed for clean areas that
require 90 to 100 LFPM laminar flow downstream from the filter face. Integral blowers
supply a common plenum for HEPA filters in that section. Units can be supplied with
gasketted or gel seal filters and housings made of painted or stainless steel.
|
|
 |
|
|
Series 556
This drum sampling booth is a recirculating vertical flow modular
cleanroom system with a modular plenum section. The blower, motor, and large capacity
prefilter with optional cooling coils are located in the side wall cabinets. The air is drawn
from the clean area, prefiltered, and then blown through the room. Side-replaceable HEPA
filters are located in the upper plenum. Options include stainless steel shell, stainless
steel walls, clear curtains, and strip doors in custom configurations.
|
|
|
|
|
Series 575
This softwall modular cleanroom features a 2-foot x 4-foot or 2-foot x 8-
foot tube steel upper support frame with integral nest-tight ceiling grid system, a 4-foot x
4-foot angle iron or tube steel support legs, clear spans up to 24 feet, and heights up to
16 feet. Units can be modified to meet California seismic requirements. Available in Class
100,000 to Class 10. Air vents from cleanroom into surrounding space. Temperature and
humidity inside the room are determined by the surrounding space.
|
|
Series 577
The Series 577 softwall modular cleanroom features a 3-foot x 3-foot tube
steel support frame and 3-foot x 3-foot tube steel legs. Spans are available up to 12 feet
or up to 24 feet with a super beam. Height available up to 12 feet. This cleanroom uses
a modified 2-foot x 4-foot ceiling grid system. Available in Class 100,000 to Class 10.
|
|
Series 558
This vertical flow modular cleanroom system is designed for Class 100 and
Class 10 applications where near 100% HEPA filter ceiling coverage is required, but
overhead clearance is limited. Side wall blower cabinets contain blowers, prefilters, cooling
coils, acoustical lining and other controls. These blower cabinets feed upper plenum
sections that contain gel seal HEPA filters, tear drop lights, and perforated diffuser screens.
Perforated raised floors can also be added for improved airflow.
|
|
Series 560
The Series 560 vertical flow modular cleanroom system is designed for
Class 100 and Class 10 applications where near 100% ceiling filter coverage is required.
The modular plenum sections utilize top-mounted blowers, minimizing the overall
footprint of the cleanroom. The modular plenum sections can be suspended from an
existing building or can utilize a self-contained support frame.
|
|
Series 582
This hardwall modular cleanroom has metal wall panels and a nest-tight
ceiling grid system. It is typically used for applications where air is recirculated within the
cleanroom. Air conditioning is added to the room for comfort or for process control.
|
|
Series 583
The Series 583 hardwall modular cleanroom utilizes metal wall and ceiling
panels. The room wall joints can be sealed for pharmaceutical or food processing
applications. Sealed-light, room-side replaceable filters with stainless steel grills are used.
Also features cleanable wall returns.
|
|
Series 591
This hardwall cleanroom is a modular cleanroom system with high visual
appeal. Available in Class 100,000 to Class 10, the Series 591 uses a clear anodized
aluminum support frame and either clear or white wall panels. The ridged walls allow the
cleanroom to operate at a higher pressure than softwall rooms. This system utilizes full-
perimeter wall air returns for improved room airflow. Clear spans are available up to 30
feet without center support.
|
|
Series 201
This tabletop, horizontal, laminar flow clean bench is designed to sit on an
existing table to or support stand. The HEPA filter is serviced from the front of the unit.
The blower and prefilters are located on the top of the unit. Options include stainless steel
tabletop, safety glass hood, IV bar, leg support stand, and lower storage cabinet.
(Shown with optional leg stand and ionization bars.)
|
|
Series 204
This is a horizontal laminar flow clean bench unit designed to install on top
of typical metro wire or eagle-type wire shelving. It is also designed to set on a table top
and blow horizontally. Units come in 2 x 2 ft., 2 x 3 ft., 2 x 4 ft., and 2 x 6 ft. sizes. The
prefilter is serviced from behind the unit.
|
|
Series 301
This clean bench is a horizontal flow, floor-standing filter cabinet with air
inlet prefilters located below the tabletop on the front of the unit. A polycarbonate hood
located in front of the HEPA filter creates a Class 100 work area. The HEPA filter is
serviced from the front of the unit. Options include ULPA filter, stainless steel tabletop,
stainless steel shell, and removable grill in front of HEPA filter.
|
|
Series 303
This horizontal, laminar flow HEPA filter cabinet is a floor standing unit with
just a hood no tabletop. It is designed to allow an existing table or piece of equipment
to be placed in front of the unit. Options include ULPA filter, clear ESD PVC hood, stainless
steel shell, front perforated diffuser screen, and rear air intake.
|
|
Series 305
This clean bench has horizontal flow with temperature control and an
optional humidity control cabinet. It has horizontal-flowing, HEPA-filtered air, a painted
stainless steel table top, front-perforated lower and upper return air grills, a clear
polycarbonate hood, and internal fluorescent lighting. Temperature control to ± 0.5° F;
humidity to ± 2%.
|
|
Series 412
These vertical, laminar flow clean benches are constructed with a painted
steel support frame, internal HEPA filter, blower, and lights. The upper cabinet sits on top
of the lower support frame. These units are available in a variety sizes and frame
configurations. All clean benches are available with ULPA filters in a variety of sizes,
including custom configurations.
|
|
Series 416
The Series 416 clean bench is designed to make small clean spaces. These
units include a decorative top filter housing that can install on top of a wire shelving rack,
for a clean storage area or gowning rack. They can also be installed onto a lower support
stand that then rests on top of an existing table, creating a small vertical flow clean bench.
|
|
Series 19
The Series 19 desiccator cabinets are constructed with a heavy-duty stainless
steel shell, stainless steel door, heavy-duty stainless steel hinges, and heavy-duty over-
center cam latch. Options include clear acrylic, safety glass, or ESD-safe PVC viewing
window; manual or automatic purge; casters; door alarms; and high security door locks.
|
|
Series 91 - SC
Series 91 clean room storage cabinets are durable white painted steel construction
and are available in both non filtered and HEPA filtered. Options include stainless steel
shell, internal solid, perorated or wire shelving, riser support legs, lockable front doors.
|
|
Series 91 - HF
Series 91 clean room storage cabinets are durable white painted steel construction
and are available in both non filtered and HEPA filtered. Options include stainless steel
shell, internal solid, perorated or wire shelving, riser support legs, lockable front doors.
|
|
Series 38
These clean room garment racks are stainless steel and come in single or
double-pole versions with or with out hanger spacers. These large freestanding or wall-
mount garment rack systems are available with specialty hangers and/or garment hooks
for applications requiring high-volume garment storage.
|
|
Series 1522
This unit is an inflow cabinet with HEPA filtered exhaust. It is designed to
have 150 LFPM inflow velocity with two stages of prefiltering followed by a HEPA filter.
HEPA-filtered air is discharged out the bottom of the unit. The unit has a removable front-
perforated stainless steel grill, behind which are the prefilters and HEPA filter. Also
included is polycarbonate hood, stainless steel table and fluorescent light. Options include
stainless steel shell, carbon prefilters, hazardous-location motor with spark-proof wheel,
hazardous-location light, ergonomic motorized hydraulic legs, and variable frequency drive
motor controller.
|
|
|
|
|
Series 1532
The Series 1532 inflow wall cabinet features HEPA filtered exhaust. It is
designed to have a wall of inflowing air to contain light powders. Process uses two stages
of prefiltering followed by a HEPA filter. The unit is designed to discharge air back into the
existing space. Hinge or lift-off front grill provides access to front-removable prefilters and
HEPA filters. Options include an all-stainless steel shell, top front discharge of the exhaust
air, clear polycarbonate hood, and hazardous-location motor with spark-proof blower
wheel.
|
|
Series 1411
Series 1411 fume hood available in stainless steel or acid resistant polypropylene fume
hoods are available with the solid liquid tight table top, interior rear adjustable baffle,
sealed fluorescent light and sliding front viewing window. Options include sinks,
goosenecks, hand sprayers, lower storage cabinet or stand.
|
|
Series 1412
Series 1412 Fume hood with liquid tight exhaust plenum have a liquid tight exhaust
plenum below. This allows internal process baths, tanks and components to be installed
with a removable table top to allow access to plumbing and other service. The hood also
has an sealed fluorescent light, upper instrument head case options hinged or sliding
front window, lip exhaust on process baths, many process accessories, lower storage
cabinet. Hoods are made to order using pre engineered components.
|
|
Series 1414
Series 1414 Wet Process station for application where fume control and a clean working
environment are required. Then station has a lower liquid tight exhaust plenum,
removable table top, removable side and end shields, upper instrument head case.
Stations available in Stainless steel, Standard and fire retardant Polypropylene and factory
mutual 4910 approved PolyPro, PVDF and CPVC. Internal options as required for your
specific processing requirements.
|
|
Series 61
This series of formica tables are constructed with a heavy-duty 1-1/8-inch core
particleboard covered on all sides by white plastic laminate. A welded tubular steel support
frame supports tabletops. Tables are shipped knock down. Options include ESD table top;
white, blue or gray colors; telescoping table legs; casters; risers, and shelves. Support frames
are available in stainless steel, white powder coat, standard, or extra heavy-duty.
|
|
Series 62
These clean room stainless steel tables are constructed with a heavy-duty
table top, under-table reinforcing braces, and a tubular stainless steel support frame. The
smooth design allows for easy cleaning. Options include electro polishing, custom sizes,
risers, shelves, drawers, and casters, as well as heavy-duty support frames.
|
|
Series 64CT
These perforated clean room stainless steel tables have a smooth-top,
full-perforated table center with .25-inch, .34-inch or .75-inch diameter holes. They have a
2-foot x 2-foot tubular steel support frame with perforated cross braces that keeps the
tabletop stiff and flat. The smooth construction allows these tables to be easily cleaned.
Options include electro polishing, heavy-duty support frame, upper risers, lower shelves,
foot bars, and custom sizes.
|
|
Series 64PF
This series of perforated clean room stainless steel tables has an 1/8-inch
diameter perforated tabletop that is installed into a perimeter table frame. Under-table,
vertical support braces are installed in an egg crate pattern and are welded to the
underside of the 1/8-inch perforated tabletop keeping it strong and flat. The standard
table is electro polished. Tables are supported by tubular steel support legs and
corner braces.
|
|
Series 63
These clean room gowning benches are available in stainless steel or
laminated bench top. Options include lower boot storage, and electro polished
bench tops.
|
|
Series 109
These motorized filter units are self-contained air filters. They feature HEPA
or ULPA filter integral backward curved blowers with integral motors. The 2-foot x 4-foot
unit has a sloped top. Other sizes include 1-foot x 1-foot, 1-foot x 2-foot, 1-foot x 3-foot,
1-foot x 4-foot, 2-foot x 2-foot, and 2-foot x 3-foot. The 2-foot x 4-foot and 2-foot x 2-foot
have undersized filters to allow for easy installation.
|
|
Series 112-424
These motorized HEPA filter units are self-contained air filters, sized to
fit a standard 2-foot x 4-foot ceiling grid system. Units have a galvanized blower housing,
rectangular housing, hanger supports, three-speed motor, internal sound-absorbing baffle,
and top-mounted prefilter. Options include ULPA filter, painted steel or aluminum blower
housing, speed control, power cord, and flow thru light.
|
|
Series 112RSR-424
This motorized ceiling filter features a room-side replaceable
HEPA/ULPA filter. Units are available to install into a tee-bar grid system or into a
sheetrock ceiling. Options include room-side DOP sampling and injection ports, stainless
steel room-side perforated grill, room-side survivable motor, and speed control.
|
|
Series 116
These white painted steel blower/filter cabinets are designed to sit on top
of a support frame or be suspended from a support structure with the HEPA filter
discharge blowing downward. The prefilters and service panels are interchangeable to
allow the prefilters to be installed onto the front, top, or rear of the unit. The HEPA filter is
serviced either from the front or rear of the cabinet. Options include stainless steel shell,
ULPA filter, light diffuser, and power cord.
|
|
Series 130
Series 130 Horizontal flow wall module. Typically used to create a horizontal flow clean
area. Multiple units can be put side by side with a hood or side walls to create a clean
horizontal flow work area. The length of the side walls or hood is unlimited. Units can be
made with the blower on the top Series 132 shown or Series 133 with the blower
behind, lower overall height.
|
|
Series 150
The Series 150 is a modular plenum section with built-in blower motor.
Units have full HEPA/ULPA filter coverage with teardrop or flush-mount lights. Features
include room side replaceable HEPA/ULPA filter, DOP sampling ports, perforated stainless
steel or painted/anodized aluminum removable room side ceiling diffuser grills. Units can
be suspended and incorporated into an existing ceiling system or be free standing
utilizing support legs. Use with Class 100 or Class 10 in application laminar airflow at 90
LFPM velocities, down stream of the filters is required. (CAP550 is 150 on support legs.)
|
|
Series 901
The Series 901 walls are an all-metal, non-progressive wall panel system.
These walls are manufactured as inside and outside wall panel halves. When an inside
and outside half are assembled together, the center cavity between the panels is hollow,
allowing it to be used as a return air chase. The halves can be installed with a space
between, allowing conduits or piping to be attached to the backside of the inner panel,
with the outer panel being removable to access pipes and fittings. Available in vinyl-
covered steel, painted steel, and stainless steel.
|
|
|
