Click image to enlarge
Price: Quote

Standard Features of CAP412-6T42-36H-64C-ER-WR-PC-LSS

  • Removable type 304 #4 finish stainless steel work surface with staggered 0.34” diameter perforations on the front and rear sections
  • Welded liquid-tight type 304 #4 finish stainless steel exhaust plenum with 1-1/2” diameter center drain coupling
  • Type 304 #4 finish stainless steel exhaust duct that also supplies the intake air for the blowers
  • Welded 16 gauge steel filter cabinet with a white powder coat finish
  • Welded 11 gauge 2x4 tubular steel lower frame with a white powder coat finish
  • Type 304 #4 finish stainless steel back panel
  • Hinged clear polycarbonate front face shield
  • Clear polycarbonate side shields
  • Aluminum-framed HEPA filters that provide ISO Class 5 (Fed Std 209E Class 100) performance
  • Electronically ballasted shatter resistant fluorescent lamps that produce 100 footcandles at the work surface
  • PSC motors with ball bearings, automatic reset thermal protectors, and solid state speed controls
  • Balanced centrifugal direct drive galvanized steel blowers
  • 65 dBA
  • 90 Ft/Min +/- 20% filter face velocity @ STP
  • Pigtail wires for hard-wiring by others – 120V, 60Hz

Please answer the questions below and then click the Add to Quote button above.

  • What is the working area length, depth, and height you desire?:
  • Do you require horizontal flow, vertical flow, or not sure?:
  • Do you need a class rating for the bench? If so, what class rating?:
  • What is the size of the door opening for the room where the clean bench will be used?:
  • Are there any other requirements?:
  • Inside Width: Inches (mm): 70 (1778)
  • Outside Width: Inches (mm): 74.5 (1892)
  • Inside Depth: Inches (mm): 42 (1067)
  • Outside Depth: Inches (mm): 48.25 (1226)