Vertical Laminar Clean Benches | Flow Exhausting Unit Base Clean Benches | EU CA | Vertical Laminar Flow Exhausting Unit Base Clean Bench Nominal 6' Wide x 42" Dee

Home > Clean Benches > Vertical Laminar Flow Exhausting Unit Base Clean Benches EU CAP412 > Vertical Laminar Flow Exhausting Unit Base Clean Bench Nominal 6' Wide x 42" Deep

Click image to enlarge

[CAP412-6T42-36H-64C-EU-WR-PC-LSS]

Price: Quote

Quantity:

Standard Features of CAP412-6T42-36H-64C-EU-WR-PC-LSS

Removable type 304 #4 finish stainless steel work surface with staggered 0.34” diameter perforations on the front and rear sections
Welded liquid-tight type 304 #4 finish stainless steel exhaust plenum with 1-1/2” diameter center drain coupling
Welded 16 gauge steel filter cabinet with a white powder coat finish
Welded 11 gauge 2x4 tubular steel lower frame with a white powder coat finish
Type 304 #4 finish stainless steel exhaust duct
Type 304 #4 finish stainless steel back panel
Hinged clear polycarbonate front face shield
Clear polycarbonate side shields
Prefilters that can be relocated to the front or back of the filter cabinet
Aluminum-framed HEPA filters that provide ISO Class 5 (Fed Std 209E Class 100) performance
Electronically ballasted shatter resistant fluorescent lamps that produce 100 footcandles at the work surface
PSC motors with ball bearings, automatic reset thermal protectors, and solid state speed controls
Balanced centrifugal direct drive galvanized steel blowers
65 dBA
90 Ft/Min +/- 20% filter face velocity @ STP
Pigtail wires for hard-wiring by others – 120V, 60Hz

Please answer the questions below and then click the Add to Quote button above.

What is the working area length, depth, and height you desire?:
Do you require horizontal flow, vertical flow, or not sure?:
Do you need a class rating for the bench? If so, what class rating?:
What is the size of the door opening for the room where the clean bench will be used?:
Are there any other requirements?:

Specifications

Product Files