Standard Features of CAP412-10T30-36H-64C-ER-WR-PC-LS

• Removable type 304 #4 finish stainless steel work surface with staggered 0.34” diameter perforations on the front and rear sections
• Welded liquid-tight type 304 #4 finish stainless steel exhaust plenum with 1-1/2” diameter center drain coupling
• Type 304 #4 finish stainless steel exhaust duct that also supplies the intake air for the blowers
• Welded 16 gauge steel filter cabinet with a white powder coat finish
• Welded 11 gauge 2x4 tubular steel lower frame with a white powder coat finish
• Type 304 #4 finish stainless steel back panel
• Hinged clear polycarbonate front face shield
• Clear polycarbonate side shields
• Aluminum-framed HEPA filters that provide ISO Class 5 (Fed Std 209E Class 100) performance
• Electronically ballasted shatter resistant fluorescent lamps that produce 100 footcandles at the work surface
• PSC motors with ball bearings, automatic reset thermal protectors, and solid state speed controls
• Balanced centrifugal direct drive galvanized steel blowers
• 65 dBA
• 90 Ft/Min +/- 20% filter face velocity @ STP
• Pigtail wires for hard-wiring by others – 120V, 60Hz